How to Fix GoPro SD Card Errors?

As the GoPro user base grows, so does the number of issues. if you are reading this, you may have run into error messages like NO SD or SD ERR.

Here, I have compiled the most common issues that users have faced and presented them in the form of this article.

Causes

• Incompatible SD card – Your SD card, media, or operating may be outdated causing incompatibility issues. You can install the attest updates to fix this.
• Corrupt or damaged SD card – data corruption is fairly common and can prevent users from accessing or playing video files. A professional service or video repair software is your best option to rectify this.
• Premature or sudden ejection – Suddenly ejecting or interesting your SD card (especially during transfers) can cause some data to your SD card
• Physical damage – physical damage Scratches, overheating, etc. can cause several issues. Here, a professional data recovery software would be your best option

Effective Ways to Fix Common GoPro SD Card Errors

1. Disable Write Protection

If write protection is enabled, you won’t be able to modify its contents or add new GoPro Footage. Write protection can be toggled using a physical switch on the side of the SD card. To disable write protection on your GoPro SD card, simply slide the slider upward and verify the results.

2. Clean SD Card Slot

Using a microfibre cloth or compressed air to clean out the SD card slot and the SD card goes a long way to prevent any dirt or debris from obstructing the connection. Regular cleaning will also prevent the SD card from enduring scratches in the future.

3. Update Firmware

At times, users are unable to access their GoPro SD card due to compatibility issues. You can fix it by updating your GoPro SD card firmware.

Part 1: Update Firmware Using Your Computer

1. Insert your GoPros micro SD card into your laptop. (Use an SD Card reader If your laptop does not have a slot)

2. Download the update file.

3. Go to Downloads and locate the update file.

4. Extract the update file from the compressed file.

5. Transfer the extracted update file to your micro SD card.

Part 2: Update Firmware Using Your GoPro

1. Make sure that your GoPro is charged.

2. Turn off the GoPro camera and install the SD card.

3. Power the camera on.

4. Your camera will automatically begin the update.

5. Do not interrupt the update process. After the Gopro is done updating you will see a check mark on the screen.

4. Fix Corrupted GoPro SDcard

If your SD card or video files get damaged or corrupted, it would be hard or even impossible to play them. During such cases, there are a few options that you can try and they are listed below-

4.1 Repair Corrupted Video Files.

A professional video repair tool would be a wise choice. Over here, we will use Rikvr Video Repair.

1. Download, Install, and launch RIKVR Video Repair on your computer.

2. Click on Add File choose the GoPro video, and click on Repair to begin the repair process.

3. After the repairs, the repaired video file will be displayed along with a description.

4. Verify the results using the Preview option before saving.

5. Save the repaired GoPro video file to your system.

4.2 Windows Error Checking Tool

The Windows Error Checking tool is a safe and easy-to-use method that will scan your GoPro SD card for damage or errors and attempt to fix them. You can try it out using the steps below-

1. Connect your SD card to your Windows computer.

2. Right-click on your GoPro SD card and select Properties.

3. Under the Tools tab, in the error checking section click on Check.

4. Click on Scan and Repair Drive.

4.3 Format GoPro SD Card

Formatting clears out your entire GoPro SD card including the file system within it. This is extremely effective if your SD card is corrupted or has logical damage. One major downside is that you will stand to lose all your data within it.

Note: Before proceeding, please make sure to save all the contents onto another drive.

1. Transfer all video files with your GoPro SD card to another drive.

2. Connect your SD card to your Windows computer.

3. Right-click on your GoPro SD card and click on Format.

4. Select a file system format and click on Start.

5. Recover Deleted GoPro Videos

One of the most common issues known to man is accidental deletion. during such situations professional data recovery tools such as Rikvr Data Recovery Software work best.

6. Clearn Gopro Storage

If you let your GoPro SD card fill up, then any new video shot won’t be saved. Apart from this, your GoPro may freeze, and bombard you with error messages or alerts. Regularly transferring your videos to another drive to free up space is a must.

Conclusion

I hope you were able to resolve your GoPro SD card errors using this article. To avoid such incidents in the future, make sure to update your software and firmware regularly. It also helps to create and maintain a backup folder. If you have any feedback or related questions, please feel free to reach out.

Frequently Asked Questions